In the world of toric contact lenses, two fairly new options have emerged as top contenders: Bausch+Lomb INFUSE for Astigmatism and ACUVUE OASYS MAX 1-Day for Astigmatism. Both lenses offer wearers advanced technologies to enhance comfort and visual performance. In this comprehensive comparison, we will dive deep into the features, specifications, and benefits of each lens to help you have an informed discussion with your eye doctor.
Table of Contents
Design and Technology
Johnson & Johnson Vision's ACUVUE OASYS MAX 1-Day for Astigmatism and Bausch + Lomb INFUSE for Astigmatism reflect two distinct engineering philosophies in how modern toric daily lenses achieve comfort, stability, and optical consistency.
ACUVUE OASYS MAX builds on the proven toric BLINK STABILIZED Design, which uses four active stabilization zones that interact with the natural pressure of your eyelids during blinking to quickly realign the lens and resist rotational drift. This is important in astigmatism correction, where even small degrees of rotation can reduce visual acuity. Layered onto this is Johnson & Johnson's TearStable Technology, which combines a highly wettable silicone hydrogel matrix with embedded tear-mimicking components to maintain a stable tear film and reduce evaporation over long wear times. Additionally, the lens incorporates UV Class-1 blocking and blue-violet light filtering (HEVL filtering), targeting higher-energy visible light without significantly altering color perception.
In contrast, INFUSE for Astigmatism takes a more material-centric approach to design. Its toric stabilization system is engineered to achieve rapid orientation and consistent positioning, but the real emphasis lies in the silicone hydrogel formulation itself. The lens features a high water content than ACUVUE OASYS MAX alongside a relatively low modulus, meaning it is softer and more flexible on the eye, allowing it to better conform to the ocular surface and reduce mechanical interaction with the eyelids.
Bausch+Lomb's unique ProBalance Technology integrates osmoprotectants, electrolytes, and moisturizers directly into the lens matrix to help maintain corneal cell homeostasis and counteract environmental stressors such as digital device use and reduced blink rate.
While ACUVUE prioritizes structured stabilization and tear film control as primary design drivers paired with best-in-class UV and HEVL filtering, INFUSE leans into advanced material chemistry and ocular surface support, aiming to deliver a more "biomimetic" wearing experience.
Comparison of Material and Parameters
Material and Moisture Retention
The toric ACUVUE OASYS MAX is made from a material that's a bit firmer - its modulus of 0.72 compares to 0.49 in the INFUSE - so the lens stays in place and keeps your vision clear and steady. This can be especially helpful if your lenses tend to shift and blur your vision. That said, because it's slightly firmer, you might notice the lens a little more on your eye compared to the softer INFUSE lenses. INFUSE for Astigmatism lenses are made from a silicon hydrogel material with higher water content. This means it can feel more comfortable and natural on your eye, almost like you're not wearing anything at all.
Keep in mind that while these material differences influence how each lens is designed to perform, comfort and visual clarity are very individual experiences - what feels best and gives the sharpest vision can vary from person to person.
Prescription Parameters
Bausch + Lomb INFUSE for Astigmatism is more likely to be available in your exact prescription, especially if you have stronger or more complex astigmatism. It offers a wider range of cylinder powers and axis options, which means your eye care provider has a better chance of finding a precise match for your vision needs. This can translate into sharper, more consistent vision if your prescription falls outside the more common ranges. Johnson & Johnson Vision ACUVUE OASYS MAX 1-Day for Astigmatism still covers most typical prescriptions and will work well for the majority of patients. However, if you have a higher level of astigmatism or need a more specific axis correction, the available options may be more limited. In simple terms, both lenses can provide excellent vision, but INFUSE gives you a better chance of finding an exact fit if your prescription is more demanding.
Comparing Special Features
UV and HEVL Protection
Both INFUSE for Astigmatism and ACUVUE OASYS MAX 1-Day for Astigmatism provide built-in UV protection to help reduce exposure to harmful UVA and UVB rays. ACUVUE OASYS MAX 1-Day for Astigmatism offers Class 1 UV protection, blocking more than 90% of UVA and 99% of UVB rays, and also includes blue-violet light filtering, which is not currently available with INFUSE. INFUSE for Astigmatism provides Class 2 UV protection, blocking over 50% of UVA and more than 95% of UVB rays.
While both lenses add an important layer of protection, they do not replace UV-blocking sunglasses or other protective eyewear.
Comfort and Dryness
Both lenses prioritize wearer comfort and address concerns related to contact lens dryness. INFUSE for Astigmatism incorporates ProBalance Technology, a proprietary combination of osmoprotectants, electrolytes, and moisturizers that helps maintain ocular surface homeostasis. This technology enhances comfort and helps alleviate dryness, ensuring a pleasant wearing experience. ACUVUE OASYS MAX 1-Day for Astigmatism features TearStable Technology, which improves tear film stability and reduces dryness. These technologies contribute to long-lasting comfort throughout the day.
Oxygen Transmission and Water Content
Oxygen transmission is crucial for maintaining healthy eyes during contact lens wear. INFUSE for Astigmatism and ACUVUE OASYS MAX 1-Day for Astigmatism both offer high oxygen transmissibility with a Dk/t value in the 120-140 range. Exceptional oxygen transmissibility paired with a high water content (38% for the OASYS MAX and 55% for the INFUSE) support optimal corneal health and comfort throughout the day.
Cost and Price Comparison
Both INFUSE for Astigmatism and ACUVUE OASYS MAX 1-Day for Astigmatism are available through eye care professionals and online retailers, but they are packaged differently, which affects overall cost. ACUVUE OASYS MAX typically comes in a 30 lens per box configuration, while INFUSE is commonly sold in 90-lens boxes. When you break it down to a daily cost per eye, INFUSE can be as low as about $1.20 per day, while ACUVUE OASYS MAX tends to be higher priced, starting around $1.60 per day.
INFUSE for Astigmatism and ACUVUE OASYS MAX 1-Day for Astigmatism: Side-by-Side Specs
Bausch + Lomb INFUSE for Astigmatism |
ACUVUE OASYS MAX 1-Day for ASTIGMATISM |
|
|---|---|---|
| Product Image |
|
|
| Price Comparison | Lowest price found: 90 Pack: $131.74 | Lowest price found: 30 Pack: $51.84 |
| Manufacturer | Bausch & Lomb Inc. | Johnson & Johnson Vision Care, Inc. |
| Release Date | June 2024 | July 2025 |
| Prescription Parameters | ||
| Replacement Schedule | Daily | Daily |
Wearing Details
|
Daily wear | Daily wear |
| Sphere Powers | -8.00D to -6.50D (in 0.5 steps) -6.00D to +4.00D (in 0.25 steps) | -9.00D to -6.00D (in 0.5 steps) -6.00D to +4.00D (in 0.25 steps) |
|
Cylinders
|
-0.75D, -1.25D, -1.75D, -2.25D, -2.75D | -0.75D, -1.25D, -1.75D |
|
Axis
|
For -8.00D to -6.50D Cylinder -0.75D, -1.25D, -1.75D: 10°, 20°, 70° to 110°, and 160° to 180° For -6.00D to Plano Cylinder -0.75D, -1.25D, -1.75D: 10° to 180° in 10° steps Cylinder -2.25D, -2.75D: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180° For +0.25D to +4.00D Cylinder -0.75D, -1.25D, -1.75D: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180° | Low Minus: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180° High Minus: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180° Plus Range: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180° |
|
Base Curves
|
8.6 mm | 8.5 mm |
| Diameters | 14.5 mm Optical zone: 9.0 mm | 14.3 mm |
| Technical Parameters | ||
|
FDA Group
|
V-B | V-C |
| Lens Material | Silicone hydrogel (Kalifilcon A) | Silicone hydrogel (Senofilcon A) |
| Lens Design | Aspherical | Spherical |
|
Wetting Agents
|
Yes Poloxamine 1107 Poloxamer 181 | Yes - PVP |
| % of Material | 45% | 62% |
| Water Content | 55% | 38% |
|
Center Thickness
|
0.1 mm | 0.08 mm |
|
Oxygen Transmissibility
|
107 Dk/t | 129 Dk/t |
|
Modulus
|
0.49 MPa | 0.72 MPa |
|
Refractive Index
|
1.4011 | 1.42 |
| Other Features | ||
|
Special Features
|
|
|
|
UV Blocking
|
Class 2 >50% UVA >95% UVB | Class 1 >90% UVA >99% UVB |
|
Dynamic Light Absorption
|
No | No |
| Visibility Tint | Yes (light blue) | Yes (blue) |
| Inside-out Mark | No | No |
| Packaging, Pricing and Offers | ||
| Packaging Details | 90 lenses per box, each lens in a foil-sealed plastic package | 30 lenses per box, each lens in a foil-sealed plastic package |
|
Price Range
|
$132 - $176 (90 lenses) | $52 - $100 (30 lenses) |
|
Cost per Day
|
$1.46 - $1.95 (90 lenses) | $1.73 - $3.33 (30 lenses) |
|
Online Retailers
|
Special Deals Compare Prices | Special Deals Compare Prices |